6mm Milling Cutter YG8/YG10/YG12 Tungsten Carbide Gray Color For
Machines
Cylindrical milling cutter
Used for processing planes on horizontal milling machines. The
cutter teeth are distributed on the circumference of the milling
cutter, and are divided into straight teeth and spiral teeth
according to the tooth shape. There are two kinds of coarse teeth
and fine teeth according to the number of teeth. The spiral tooth
coarse tooth milling cutter has few teeth, high tooth strength, and
large chip space, suitable for rough machining; fine tooth milling
cutter is suitable for finishing.
Face milling cutter
Also known as disc milling cutter, it is used to process planes on
vertical milling machine, end milling machine or gantry milling
machine. There are cutter teeth on the end face and the
circumference, and there are also coarse teeth and fine teeth. Its
structure has three types: integral type, insert type and indexable
type.
End mill
It is used for processing grooves and stepped surfaces. The cutter
teeth are on the circumference and the end surface, and they cannot
be fed in the axial direction during work. When there is an end
tooth passing through the center on the end mill, it can be fed
axially.
Three-sided cutter
It is used to process all kinds of grooves and step surfaces, and
has teeth on both sides and circumference.
Angle cutter
There are two types of single-angle and double-angle milling
cutters for milling grooves at a certain angle.
Saw blade milling cutter
For machining deep grooves and cutting off workpieces, there are
many cutter teeth on the circumference. In order to reduce the
friction during milling, there are 15 '~ 1 ° side angles on both
sides of the cutter teeth. In addition, there are keyway milling
cutters, dovetail milling cutters, T-slot milling cutters and
various forming milling cutters.
T-shaped cutter
Used for milling T-slots.
